CPCD30

CPCD30

聯系我們

留言

General概要	1	Model型號				CPC 30/CPCD 30
	2	Rated Load Capacity額定載重			kg	3000
	3	Load Center載荷中心距			mm	500
Dimensions尺寸	4	Lifting Height起升高度			mm	3000
	5	Free lifting Height自由起升高度			mm	135
	6	Fork Size貨叉尺寸		LxWxH長寬高	mm	1220×122×45
	7	Mast Tilting Angle門架傾角		F/R前后		6/12
	8	Length (without fork)長度（不帶貨叉）			mm	2750
	9	Overall Width寬度			mm	1225
	10	Mast Height After Mast Fall門架落地高度			mm	2070
	11	Lift Height門架起升高度			mm	4100
	12	Overhead Guard Height護頂架高度			mm	2150
	13	Turning Radius轉彎半徑			mm	2515
	14	Front /back Overhang前懸距/后懸			mm	480
	15	Min. Right Angle Stacking Width最小直角通道寬度			mm	2545
	16	Wheelbase軸距			mm	1760
	17	Track輪距		Front前	mm	1000
	18			Rear后	mm	970
	19	Ground Clearance最小離地間隙	Mast門架處		mm	130
	20		Car Center軸中心		mm	200
Tire輪胎	21	Front Tire前輪				28×9-15
	22	Rear Tire后輪				650-10
Performance性能	23	Speed速度	Travel運行	Full Load滿載	km/h	18
	24			No load空載	km/h	19.5
	25		Lifting起升	Full Load滿載	mm/s	440
	26			No load空載	mm/s	450
	27		Lowering下降	Full Load滿載	mm/s	420
	28			No load空載	mm/s	360
	29	Max.Drawbar Pull最大牽引力		Full/No Load滿載/空載	kg	1696/1190
	30	Max.Gradeability最大爬坡度		Full/No Load滿載/空載	%	15/18
Weight重量	31	Total Weight整機重量			kg	4230
Power&Transmission動力與傳動	32	Battery蓄電池	Voltage/Capacity電壓/容量		V/AH	12/100
	33	Engine發動機	Model型號			XINCHAI C490BPG
	34		Rated Power/Speed額定功率/轉速		Kw/rpm	40/2650
	35		Max.Torque/Speed最大扭矩/轉速		N.m/rpm	157/1800
	36	Work Pressure工作壓力			Mpa	17.5
	37	Fuel Tank Capacity油箱容積			L	60
	38	Transmission Type制動類型				Mechanical/Automatic機械擋/機械液力/電子液力